Digital Wisdom LLC adds latest in a series of certifications.
Digital wisdom LLC announces the completion of the Dell
Ax100i certification. With the completion of this certification
we will be authorized to diagnose equipment problems and
service the equipment by replacing any malfunctioning parts.
The following skills are required to successfully complete
Identify the features of the Dell|EMC AX100i.
Identify installation and configuration processes for the
Dell|EMC AX100i according to current support policies.
Identify proper cabling procedures for the Dell|EMC AX100i.
Identify basic troubleshooting procedures for the Dell|EMC
Install and configure the Dell|EMC AX100i in a customer's
Remove and replace all field replaceable units (FRUs) in
The AX100i is a rackmountable storage system enclosure,
3.5 inches (2U) high, that contains three to twelve Serial
Advanced Technology Attachment (SATA) disk drives. The AX100i
uses a gigabit ethernet port as its iSCSI interconnect interface
to host initiators. Navisphere® Express software manages
the AX100i from any qualified host on a shared 10/100Mbps
management port. Sophisticated RAID (redundant array of
independent disk) 5 and RAID 1/0 technology and data caching
prevent data loss in case of component failure. Redundant
hardware options provide levels of high availability usually
restricted to much larger high-end storage systems.
Access between hosts and virtual disks on the AX100i can
be secured by enabling Challenge Handshake Authentication
Protocol (CHAP). CHAP security allows for array-based authentication
or mutual CHAP security.